Loading…
Media wall installation in Dubai
Media Wall Work
Built-in TV and media walls with hidden cables, recessed shelves, LED lighting and the sockets and connections planned in from the start.
Overview
Media wall installation in Dubai: what to expect.
A media wall turns the TV area into a finished part of the room instead of a screen with cables hanging under it. It usually combines a built-out wall, a recess or panel for the TV, shelves or cabinets, and lighting that sets the mood in the evening.
Because a media wall is partly building work and partly electrical work, the planning matters. Sockets, data and HDMI points, the TV bracket fixing and the lighting all need to be in the right place before the wall is closed up.
We help you plan the layout, build the wall neatly and finish it properly, with cables hidden and every connection accessible for the future.
What the work may involve
- Planning the layout around your TV size, sound system and furniture
- Building out the wall with a gypsum or board frame, including TV recesses and niches
- Adding sockets, data and HDMI points behind the TV and the media unit
- Concealing cables in conduit so nothing is left hanging
- Installing LED strip lighting in recesses, shelves and coves
- Reinforcing the fixing point for a wall-mounted TV bracket
- Finishing with filling, sanding and paint, or panels for a feature effect
Common problems
Problems we are often asked about, and practical solutions.
Cables hanging below the TV
The usual fix is a power point and cable route behind the TV. On a media wall, this is planned into the frame so the cables run inside the wall and the screen looks clean.
Not enough sockets in the TV area
TVs, receivers, consoles and routers need several points. We look at the existing circuit and add the sockets you need where the wiring and the building allow.
Worried about mounting a heavy TV
A gypsum wall alone is not a safe fixing for a large TV. We add timber or metal reinforcement at the bracket position so the weight is carried properly.
LED strips that flicker or fail
This often comes from a cheap or undersized driver, or strips fitted without a channel to keep them cool. We use proper drivers and aluminium channels where needed.
How we work
Our approach to media walls.
A media wall is on show every day, so uneven joints, visible cables or a lighting strip that flickers are hard to ignore. Most of the quality is in the planning: getting the power and the fixings right before the wall is closed means you will not need to open it up again later.
- 01
We discuss how you use the room, your TV size and any equipment, and agree a layout with you.
- 02
Power, data and lighting points are positioned and run before the wall is boarded.
- 03
The frame is built straight and level, with reinforcement where the TV will be fixed.
- 04
Joints are finished cleanly, lighting is tested, and the area is cleaned before we leave.
Can you hide the TV cables inside the wall?
Yes. On a media wall the cables run in conduit inside the frame. On an existing solid wall it depends on the wall construction, and we will tell you what is practical after seeing it.
Can a media wall hold a large TV?
Yes, when the fixing point is reinforced. We plan the bracket position into the frame so the TV is fixed into solid support, not just gypsum board.
Can you add sockets behind the TV?
In most cases, yes. It depends on the existing circuit and any building rules. We check this before giving a quote.
Do I need building approval for a media wall?
Some buildings ask for approval before any internal works. Please check with your building management. We can share the details of the planned work if they need them.
Get in touch
Have Something That Needs Fixing? Let’s Get It Sorted.
Tell us what is going on. A short description and a few photos are enough to start. We will talk it through with you and explain the next step clearly.